Project Thunderbolt: Building A LS3 Powered Miata – Part 4
Tom’s Turbo Garage has started a new project building a LS3 powered Mazda Miata. In this episode Tom modifies his chassis, mounts the Getrag differential from a 2004-2007 Cadillac
Boosting Performance Through Creative Surgery. – http://www.engineswapdepot.com/
Tom’s Turbo Garage has started a new project building a LS3 powered Mazda Miata. In this episode Tom modifies his chassis, mounts the Getrag differential from a 2004-2007 Cadillac
Calibrated Success built this 1997 Mustang Cobra to be a well rounded performance car. The goal was to reduce weight, get 30+ highway MPG and keep the power close to the stock 305
Big Oak Garage is responsible for this 1965 Dodge Dart winning Great Eight at Detroit Autorama 2015. They built this Dart on a custom chassis with a late model Gen 2 5.7 L HEMI V8 that has been bored...
This second-generation Holden Rodeo was built by Mike Moore for the sole purpose of racing. To start off the driver sits directly in the middle of the cab and the engine sits behind the driver in a m...
This second-generation Holden Rodeo was built by Mike Moore for the sole purpose of racing. To start off the driver sits directly in the middle of the cab and the engine sits behind the driver in a m...
Now that Ford has started selling its EcoBoost engines as crate models I have been seeing more and more projects using them. Take for example this 1972 Ford F100 truck built by
Foose Design has done it again. The 1965 Chevrolet Impala he built for Don and Elma Voth has won Foose his fourth Ridler Award. Chip decided
The guys who brought you the 48 Hour Camaro build are back but this time building an amazing 1972 Corvette. The power for this beast will come from a 649 horsepower Lingenfelter built LS7. For everyt...
The builder is looking to sell this unfinished mid-engine Toyota Land Cruiser project. The body has been widened by 12 inches and includes a full roll cage. The drivetrain consists of a Chevy 383 ci ...
The builder is looking to sell this unfinished mid-engine Toyota Land Cruiser project. The body has been widened by 12 inches and includes a full roll cage. The drivetrain consists of a Chevy 383 ci ...
McLearran Motorsports was offered a free 1986 Mustang SVO roller after helping pull the engine from it. Instead of swapping a V8 they decided to keep with the spirit of the SVO and chose a 2.0 L EcoB...
McLearran Motorsports was offered a free 1986 Mustang SVO roller after helping pull the engine from it. Instead of swapping a V8 they decided to keep with the spirit of the SVO and chose a 2.0 L EcoB...
Speedhunters is about to do a series on motorcycle powered vehicles and is looking for submissions. Here is your chance to get featured on a very popular website. All submission must be submitted by ...
It would seem Vidar Jødahl’s 2JZ powered BMW E30 M3 is as fast on ice is it is on concrete. On a frozen lake in Sweden Vidar was able to reach 197 mph and set a new record for the fastest 2WD car on ...
If you are looking for a cheaper alternative to a V8 swap in your Miata you may want to consider a Honda J-series V6. Mini Tec sells a JV6 swap kit for $3,500 that will allow you to swap any 1999-200...
The owner of this amazing Alfa Romeo 105 has built the car of his dreams and I am sure others as well. The biggest modification is the removal of the factory engine and replacing it with a Nissan SR2...
This is a beautiful 1997 XK8 with a LS1 out of a 2000 Corvette. The swap was completed using a kit from Jaguar Specialties. Their kits allow you to run any 1969 or newer Chevy V8 into multiple Jaguar...
James and Mike from Ringbrothers stopped by Jay Leno’s Garage to talk about their 1966 Chevy Chevelle Recoil that took 5,000 man-hours to complete. The engine is a Wegner Motorsports built 416 ci LS7...
Saab specialists Neo Brothers took a second-generation Saab 9-3, removed all the body panels and then wrapped it in a classic Saab 96 body. The engine is a turbocharged 2.0 L B207 which is based on t...
I wanted to run a giveaway for some time now but finding how to run one fairly and in a trustworthy manner can be tough and time consuming. Amazon just started a giveaway program and I figured it wou...
Tom’s Turbo Garage has started a new project building a LS3 powered Mazda Miata. In this episode Tom takes his 6.2 L LS376/525 crate engine and mounts it up to the new subframe. Tom
Turbo Dynamics Canada has taken a sixth generation Pontiac Grand Prix GTP and turned it into a AWD monster. First up they have taken off the supercharger found on the factory 3.8 L L67 V6 and install...
Speed Academy created a two-part series on swapping a K20A into a Acura Integra. Although the guide was written around a K20A and a 1992 Integra, it should be helpful for those looking to use either ...
Jon Swift stopped by Jay Leno’s garage to talk about the history behind this very unique custom 1972 Oldsmobile Cutlass. Vic Hickey was a GM engineer and created this off road racer for GM. The car b...
This Datsun 280Z is for sale in Austin, Texas. The engine is a 5.3 L iron-block LM7 V8 which is usually found in GM trucks and SUVs. The engine has an LS1 intake and JCI LSx swap headers. The updrage...