Custom Toyota Starlet with a Turbo Volvo B230
The builder says this project was built to perform not look pretty. And that is exactly what the Swedish creation does. It started with a custom tube chassis with a Toyota Starlet body modified to fi...
Boosting Performance Through Creative Surgery. – http://www.engineswapdepot.com/
The builder says this project was built to perform not look pretty. And that is exactly what the Swedish creation does. It started with a custom tube chassis with a Toyota Starlet body modified to fi...
This 1973 AMC AMX Javelin was built by Powerhouse Customs in Proctorville, Ohio. The car is called Bad Intentions because Powerhouse Customs absolutely had no intentions of keeping things stock. The ...
This is a custom 1926 Ford Model T convertible was built six years ago by Roy Rockwell. The design took inspiration taken from Bo Jones’ famous modified-style T. The steel body was narrowed 8 1/2 inc...
The ’32 Ford is a popular starting point for many hot rod and custom builds because of its timeless design. Alan Lee is planning on setting his three-door coupe apart from everything else that has co...
Although the cutout in the hood might give away something this 1980 Chevrolet Malibu will still sneak up on a lot. The Malibu is currently for sale in California with an asking of $12,000. The clean ...
Many automotive fans have seen concept renderings and thought it would be fun to build it but very few ever get around to it. James Schwartz isn’t one of those type of people. He saw a rendering by A...
Many automotive fans have seen concept renderings and thought it would be fun to build it but very few ever get around to it. James Schwartz isn’t one of those type of people. He saw a rendering by A...
When we last wrote about this Plymouth truck the team was still putting the finishing touches before taking it to the Rocky Mountain Auto Show. Since then the truck is finished and runs under its own...
This Nissan S15 was built by Garage Miniz in Hokkaido, Japan and recently won Best of Show at StanceNation Japan G Edition 2015. Under the hood sits a twin-turbo 4.0 L 1UZ-FE V8. The engine is runnin...
What you are looking at is a piece of engine swap history as the very first Porsche to be powered by a V8 engine. In less than a week it will be sold and find its way into one lucky owner’s garage. T...
The Roadkill team went to Santa Rosa, California to pick up a heavily modified 1974 Mazda truck and drive it down to compete in the Optima Ultimate Street Car Challenge. The truck originally came wit...
This project started with a 1972 Plymouth Barracuda which had a body-off restoration performed by Kevin Douglas. The owner then found a wrecked 2005 Dodge Ram SRT-10 which had the engine, transmissio...
Steve Morris Engines debuted a custom quad-turbo V16 built for the Devel Sixteen supercar. The engine took two years to develop and over 2,000 man-hours to build. Everything on or in this engine is c...
Gabura Racing Technologies in Munich, Germany is fulfilling many BMW fan’s dreams by building a supercar out of a BMW i8. The supercar is being called the GRT V8i and will feature a twin-turbo V8 fro...
It has been almost four months since the guys at Bad Obsession Motorsport released an episode of Project Binky. In case you haven’t been following, Project Binky involves installing a Toyota Celica G...
This 2001 Lexus IS300 is for sale in Atlanta, Georgia with an asking price of $22,000. The car comes with a built 6.2 L LS3 that has 50K miles on the bottom, new heads and was built to handle forced ...
Chris Boyette always wanted to build a S2000 drag car. The project started when he found a S2000 roller which previously had been used as a drift car. The benefit being he could use whatever power pl...
This is an old unpublished article I have kept for a while mainly for research and figured it would be fun to publish it. All the projects in this list are older. All these projects vary in their lev...
This 1957 Fiat 500 Nuova project was completed by a single owner five years ago. The car rides on a custom tube chassis with a ten-point roll cage. The engine is a 2.5 L Subaru EJ25 (probably EJ257) ...
Sam Turner has loved motorcycles ever since he received his first at age 8. Then at age 12 his Father taught him how to weld and he has been building things ever since. Sam’s recent creation allowed ...
When BMW rolled this 1972 2002 out of the factory it had a 2.0 L inline-four engine. Since then some very meticulous Southern California builders completely overhauled this classic and upgraded every...
This Caterpillar hot rod was created as a tribute to the builder’s Grandfather who was an excavator. The builder had fond memories of operating those Caterpillar machines with his Grandfather. The bu...
Pistonhead Productions in Barrie, Canada started a Indiegogo campaign to help with building a 1990 Mazda Miata with a Cummins 4BT. The team will begin the project in the summer of 2016 and for only t...
MotiveDVD is starting a new project called Erubisu (Japanese for Elvis) and documenting the process as they go. The project involves installing a VR38DETT from an R35 into a R34 Skyline V-Spec. The e...
This pro-touring 1968 Camaro was built by Pro Comp Custom in Glenshaw, Pennsylvania. The car rides on a Martz Chassis suspension running Ride Tech Shockwave air bags. The Camaro is powered by a 427 c...