Open Menu
Open Menu
::

Volvo 740 with a Turbo 2JZ-GTE

Published in engineswapdepot.com

Pål Ivar Frigstad from Frigstad Motorsport has owned this 1988 Volvo 740 since 2009. Over the years the car has seen many changes. Pål transformed the car into “Badvolvo” to compete in Norwegian and Swedish drift events.

black 1988 Volvo 740

black 1988 Volvo 740

Volvo 740 with a turbo 2JZ-GTE inline-six

The car is powered by a turbocharged 3.0 L Toyota 2JZ-GTE VVTi inline-six capable of 826 hp (607 kW). Widmer Motor built the engine with Wiseco forged pistons, Eagle H-beam rods, ported head, GSC S2 billet camshafts, and GSC valves and springs. A custom stainless steel exhaust manifolds spins up a Precision 6870 Gen 2 turbocharger.

turbocharged 2JZ-GTE inline-six in the engine bay of a Volvo 740

turbocharged 2JZ-GTE inline-six in the engine bay of a Volvo 740

The motor runs on E100 fuel held in a custom 40-liter cell. Two in-tank Walbro GST-535 pumps push the fuel to a custom rail with Bosch 2200 cc injectors. Everything is controlled by a MaxxECU on a custom wiring harness.

turbocharged 2JZ-GTE inline-six in the engine bay of a Volvo 740

fuel cell and pumps in the back of a Volvo 740

Behind the motor is a OS Given 3-plate clutch connected to a Sellholm MPG five-speed sequential transmission. A custom two-piece driveshaft transfers power to a modified Volvo 1031 rear end with a custom Sellholm 2-way differential and Sellholm 31-spline axles.

Sellholm MPG five-speed sequential and driveshaft

modified Volvo 1031 rear end and custom exhaust

The car rides on a TXR Performance front suspension with Volvo 940 spindles, 
BC Racing adjustable coilovers, and Sellholm rallycross steering rack. Pål upgraded the front brakes to Volvo V70R Brembo 4-piston calipers with 330 mm rotors. The rear suspension features a custom 4-link and Watt’s link with custom Proflex 3-way ajustable coilovers.

front suspension and Volvo V70R Brembo 4-piston caliper with 330 mm rotor

dual rear calipers

dual rear calipers

All of the body panels on the car are composite. The front hood, bumper, fenders, and doors are made from fiberglass. The rear quarter-panels and trunk lid are made from carbon-kevlar. Under each arch is a 59 North D-004 wheel (17×8.5, 18×9.5).

fiberglass hood, bumper, and fenders on a Volvo 740

carbon-kevlar rear quarter-panels and trunk lid on a Volvo 740

The interior features a custom fiberglass dash holding a Ecumaster digital display and Autometer gauges. Pål sits in a Sparco seat protected by a QSP six-point harness, Sparco fire suppression system, and custom roll cage.

race interior in a Volvo 740 with custom fiberglass dash, handbrake, shifter, and Sparco seat

Ecumaster digital display

drift spec roll cage in Volvo 740

Source: Frigstad Motorsport

Source Related Items from Catalogue Show Related Tags 740, Engineswapdepot