2Sexy Gets a New Engine – Part 6
Marty is back with a new update on his Mitsubishi Lancer. In the previous videos Marty and Al replaced the damaged turbocharged 1.5 L 4G15 inline-four for a turbocharged 2.4 L 4G69 inline-four. In th...
Marty is back with a new update on his Mitsubishi Lancer. In the previous videos Marty and Al replaced the damaged turbocharged 1.5 L 4G15 inline-four for a turbocharged 2.4 L 4G69 inline-four. In th...
DaveG is a self-described BMW nut and restorer. He is building a BMW E30 with an electric motor from a BMW i3. The motor makes 168-184 horsepower depending on the year. Dave plans on powering the mot...
Last year we shared Joe Hanna’s 1993 Subaru Impreza that he built at his shop ASF Machine in Grand Junction, Colorado. He built the 4WD car with a twin-turbo 3.4 L EG33 flat-six connected to a STI Ve...
This custom Mini was built by Pontus Svensson in Liatorp, Sweden. The project started in 2008 after Pontus received a rusty 1970 BMC Mini. He replaced a lot of old metal with new custom floors, firew...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to gut everything from a 1959 Ford Prefect 100E and install the shell over a 2002 Mazda MX-5 chassis with a 1....
The ZIL-130 truck was built by ZiL in Moscow, Russi from 1964-1994. The came from the factory with a 6.0 L ZIL-130 V8 and five-speed manual transmission. However some creative mechanics in Russian mo...
This Land Rover Defender is being transformed by @eddie_beest into the ultimate British SUV. The project starts with a 1992 Defender that received a new galvanized Defender chassis from Richards Chas...
The Skid Factory recently finished work on the Bedford Van project. The team spent many months installing a turbocharged Barra inline-six, drivetrain, and fuel, cooling, and turbo system, and many cu...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to gut everything from a 1959 Ford Prefect 100E and install the shell over a 2002 Mazda MX-5 chassis with a 1....
A talented owner in Norway is building this Toyota Celica Supra (JZA61) in his garage. The project features a tubular front and rear chassis with a Nissan S14 suspension and covered in a fiberglass w...
Alasdair Stables wanted a Vauxhall Chevette built to emulate a Group 4 race car so he turned to Retropower in Hinckley, England to create his dream car. The team chose to power the race car with a 2....
Jason Schmuck spent a lot of time and effort building his 2006 Honda S2000 at his company Schmuck Built in Mechanicsburg, Pennsylvania. Under the vented hood is a 3.2 L J32A2 V6 from a 2003 Acura TL ...
This custom Plymouth Barracuda was built by Jesse Gonzalez and his talented crew at Street Toys Hot Rods & Custom in Ciudad Juárez, Mexico. The team started with a 1970 Plymouth Cuda body they instal...
Krzysztof Pietrzyk ‘s Nissan R33 is for sale in Kielce, Poland for 60,000 PLN or about $15,988. Under the hood sits a supercharged 4.2 L Jaguar AJ-V8 V8 that produced 394 horsepower and 442 lb-ft (60...
Australian drifter Beau Yates recently rebuilt his Toyota AE86 to compete in World Time Attack Challenge 2018. Beau had the honor of Keiichi Tsuchiya driving the car in the Open Class. The AE86 is po...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to gut everything from a 1959 Ford Prefect 100E and install the shell over a 2002 Mazda MX-5 chassis with a 1....
This Opel Calibra is for sale in Kraków, Poland for 20,000 PLN or about $5,340. Mickey Garage built the car after they receiving a body shell from an AWD turbo 2.0 L model. The company installed a 2....
When the owner of this Acura NSX needed custom fabrication, he turned to Tonnee Yang at Genuine Motorsports in California. There the sport car received a custom turbo system consisting of a Comp Turb...
HGK Racing is company in Latvia known for building carbon/kevlar BMWs for drifting. Recently they have built a Toyota 86 with a carbon/kevlar body for one lucky customer. The 1,200 kg (2645 lb) car i...
This 1948 Willys Jeep truck was built into a pro-touring machine by Dan Howe for his Daughter Kaycee. The truck rides on a Schwartz Performance modified G-Machine chassis with RideTech coilovers and ...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to gut everything from a 1959 Ford Prefect 100E and install the shell over a 2002 Mazda MX-5 chassis with a 1....
Jonas Melle Mellander competed in the Swedish Drift Championship 2018 season in his Mazda RX-7. Under the hood sits a turbocharged Volvo Redblock inline-four that uses a B230 bottom-end from a Volvo ...
The Skid Factory team is back with the final build video on the Bedford Van project. The team spent many months installing a turbocharged Barra inline-six and all the needed parts to make it run. In ...
Cleveland Power & Performance debuted their 1969 Dodge Charger called Reverence at SEMA 2018 in its new paint. The company spent the summer prepping and painting the car in custom color they call Str...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to gut everything from a 1959 Ford Prefect 100E and install the shell over a 2002 Mazda MX-5 chassis with a 1....