Ford Focus Powered By A Turbo Chevy V8
Inside this 2003 Ford Focus ZX3 is a 2005 5.3L V8 with a LS9 cam, LS1 intake, 60lb injectors and a 76mm Master Power turbo. Source: LS1Tech
Boosting Performance Through Creative Surgery. – http://www.engineswapdepot.com/
Inside this 2003 Ford Focus ZX3 is a 2005 5.3L V8 with a LS9 cam, LS1 intake, 60lb injectors and a 76mm Master Power turbo. Source: LS1Tech
While surfing youtube I came across this nice 2005 Mazda RX-8 with a Honda K20Z4 motor. The build thread is in Polish but from what I could make out the car uses two ECUs and still has traction and s...
Built by Ergen Motorsport, this BMW E30 features a 3.2L S54B32 motor from a 2003 E46 M3. Custom equal length headers and an Alhpa-N engine management helps the engine to produce 360 horsepower and 26...
Super Street has posted some great information and tips on the nine most popular engine choices for swaps. It lists models to source the engine from, engine specs, estimated cost, good and bad issues...
We have featured this Viper powered 1930 Rolls-Royce before but we found a walk-around video and an engine startup. Both are not that long but it gives you a feel for the work that went into this pro...
Watch as this 5th generation Civic with a NA K series motor score a 10.50 in the quarter-mile. Source: OppositeLock
The 2JZ has always been popular for engine swaps but I have noticed more “classic” vehicles using the turbo inline-six instead of a V8. Take for example this 1965 El Camino with a factory twin-turbo ...
My memory is not great but I don’t believe I have ever heard of a 1,000+ horsepower FWD Camry before now. The monster 3MZ-FE/1MZ-FE V6 motor dynoed at 1,027 horsepower to the wheels using a GTX420R t...
Ekanoo Racing’s Lexus IS-F sports a twin-turbo engine capable of 3,000 horsepower at full boost (29 psi). Below are the specs from their site. Car features a Methanol burning custom Pat Musi 649 cubi...
RK Motors built Operation Fearless as a tribute to fallen Navy Seal Adam Brown. RK Motors used Brown’s own 1991 Bronco for the base of the project and complete transformed it. The engine
Roadkill built and raced a 1971 Datsun 240Z with a Chevy 4.3L V6 and a turbo off a 7.3L Powerstroke engine. The engine setup was good for 387 horsepower and 430 lb-ft of torque to the rear wheels. So...
Using a Weapons Grade Performance swap kit, Pure Automotive installed a LS2 from a 2007 Cadillac CTS-V into a 2013 Scion FR-S. The T-56 six-speed was sourced from a 2006 Pontiac GTO. To get the setup...
Ranz Motorsports out of El Monte, California is responsible for this unique Benz. Under the hood of this 1973 280C is a 2JZ-GTE and auto five-speed from an Aristo. The rest of the Mercedes has upgrad...
Chevrolets from the 1950s have been customized in every-way. So how do you set your project apart from the next guy’s? Gary Kollofski decided to run twin V12 motors sourced from the marine industry. ...
Take a look at this very nice Opel GT (Saturn Sky in US) with a 550 horsepower LS3 motor specifically built to compete on the track. When you couple that level of power with a weight of only 2,425 lb...
This widebody 1978 Mustang II is called “Mustang Evolution” and was built by A-Team Racing in Oregon. Besides the upgraded looks the car features a very large Triton V10. The aftermarket for Tritons ...
Depending on what forum this is on, it will either invoke a lot of love or a ton of hate. Video below shows a very nice 1968 Ford Mustang with a Toyota 2JZ swap. It took four years to complete this p...
Depending on what forum this is on, it will either invoke a lot of love or a ton of hate. Video below shows a very nice 1968 Ford Mustang with a Toyota 2JZ swap. It took four years to complete this p...
Andy Coles from Spot On Performance in Brisbane Australia has built a very powerful drag car he can drive on the street. At the core is a 1972 Holden LJ Torana with a twin-turbo Chevy V8 making 670 h...
If you have always dreamed of Honda’s version of a WRX here is your chance. Someone on Honda-Tech has built a very clean version and will sell it to you for $12,500. Engine Specs 440 WHP, tuned by sc...
This 1989 Mustang runs an Escalade 6.2L block and LS3 heads hooked up to a Paxton Novi2000 supercharged. This combo is good for 656 horsepower and 540 lb-ft torque to the rear wheels. Source: LS1Tech...
Watch as Tyson Garvin’s custom 12-rotor engine begins dyno testing. The engine will continue being tuned with hopes of soon powering an endurance powerboat. Tyson’s current record-holding powerboat f...
Watch as Steven Loader’s Holden HG street cruiser gets it’s first dyno tune at Melbourne Performance Warehouse, Australia. The engine bay holds two Turbonetics turbos set at 7 psi and a LS1 equipped ...
Check out this very nice Backdraft Racing Cobra roadster with a Ford Coyote Aluminator XS and a TKO 600 transmission. Source: Pro-touring
Freematics is an open-source OBD 2 reader on Kickstarter with only a short time left on the campaign. Difference from Freematics and other OBD-II readers Source: Kickstarter via OppositeLock