1966 Citroen Meets Chevy Bowtie Power
This swap is proof you are only limited by your budget and imagination. Jeff Meyer really thought outside the box using a French built front wheel drive 1966 Citroen as a basis for his swap. It seems...
Boosting Performance Through Creative Surgery. – http://www.engineswapdepot.com/
This swap is proof you are only limited by your budget and imagination. Jeff Meyer really thought outside the box using a French built front wheel drive 1966 Citroen as a basis for his swap. It seems...
Reading their website doesn’t tell much but it seems we are looking at a Nissan 200SX with a 3.6L BMW engine (S38B36) from a 1989–1995 M5 (E34). Then they turbocharged the engine with a Garrett GT45 ...
CWSTuning stuffed a Cadillac Northstar V8 into a 1991 Volkswagen Golf. This car has about 300 horsepower, Brembo 11″ brakes, 3″ stainless exhaust custom pearl silver paint, 16×7 front and 16X9 rear 3...
Saleen released a press release recently stating it will offer its high performance 302 crate engine. Upgrades include being bored and stroked to 5 liters, bigger injectors, upgraded aluminum heads an...
The engine was built by GM Performance Parts and GM Performance Division with the help of NHRA racer Warren Johnson to show off the LSX platform. The 454 cu in small block LSX engine has been graded ...
Or that is at least what 62 motoring journalists, from 30 countries has thought since 1999. The International Engine of the Year started in 1999, votes on the 14 categories including the most coveted ...
Lateral-G’s April Car of the Month was Jeff Hanson’s incredible 1969 Pro-Touring Camaro. Most of this car has been upgraded with just about everything Detroit Speed & Engineering has to offer stuffed...
Well it has been a while but GM has finally released details on the ZR1 Corvette with the new supercharged LS9. Since the engine wall has been strengthened the LS9 engine could preform better then pre...
Viczcar.com has just published another great article on Austin Hoke’s 1971 Datsun 240Z with a L28ET swap. The L28ET engine out of his previous ride, a 260Z, which was involved in a decent accident. H...
Take a Hayabusa 1300cc engine and put it a couple of inches off the ground on a go-kart chassis and you get something really fast. Depending on what year this engine is it has 151 hp - 171hp. I don’t ...
Gas2.org has posted an article about Engine RePower, a site which advocates swapping an engine instead of buying a new car to reduce the amount of energy used to recycle your old car (because of blown...
I doubt you can fit many groceries in the back of this Caravan anymore or at least any you don’t want shredded and toasted. Looking at this video one might think the propulsion is from the exhaust bu...
On Stacey David’s GearZ TV show he puts a Ford 302 into a 1st Generation Mazda Miata. The inspiration for this was based off people asking him to do a cheap project. What is better then a small car wi...
This 1974 DeTomaso Pantera has a 412 cubic inch aluminum engine with stainless steel headers and twin Turbonetics turbochargers. With 18 psi boost the owner was hoping for 1K HP but has only been abl...
It seems Jalopnik writer Ben Wojdyla has some issues with Ralf Becker’s 1971 Pontiac LeMans. If you remember Ralf swapped the OEM engine with a Supra 7M-GTE. Sometimes you have to chock these type of ...
JGYCustoms has taken the 1983 Mustang LX and dumped the original 4 cylinder motor for a Nissan RB25DET, making it one of the most unique Mustangs around. Currently the Mustang is getting roughly 550 ...
This 1989 Volvo 745t normally came with a 4 cylinder turbo putting out around 150-200 HP. This car is a project of sorts for the owner’s father who was heavily in the Volvo community. The Volvo calle...
American Supercars has finished their crazy mid-engine TT Corvette. On the dyno this monster turboed LS1 put out 1,067 horsepower and 980 pounds of torque. No telling what kind of boost currently the...
Carbon fiber is finding its way into every product car related these days. Now it seems carbon fiber is now being used in wheel production. WheelsandMore 20″ wheels weight only 13 lbs compared to a t...
The Suzuki Samurai was brought to the United States in 1985 and came with a 1.3L 4 cylinder engine producing around 63 HP. This Samurai named “Groundhawg”, after a blown engine the owner decided some...
Project Devious is a 1969 Camaro with a supercharged LSX block coming in at 440 cubic inches and running 25 lbs of boost. The iron block used is designed by GM Performance Parts and able to handle 2,...
We have compiled a small list of videos of the Hot Rod Power Tour LS7 swapped Solstice. Solstice drag begins half way through video. This thing is fastttt.
The Triumph TR7 was built by the Triumph Motor Company from 1974 to 1981. Yamaha helped Ford build the SHO engine which was a DOHC V6 engine for the Taurus. A SHO engine swap into a Triumph TR7 prese...
Over at the Nissan forum NicoClub this 1997 S14 has a 2JZ-GTE power plant swap which is putting out 330 rwhp. The owner claims to have around $25K spent into the car and is looking to sell. The car h...
Here is a very nice LS1 powered 240Z. With the engine being just slightly heavier then the stock engine this car is able to put down a 10.9 @ 126 mph quarter mile. The engine is also pushed as far ba...