Building a 2004 Nissan 350Z with a Hellcat V8
What are you supposed to do when you get a great deal on a supercharged 6.2 L Hellcat V8? Why not install it into a 2004 Nissan 350Z like this Chrysler/Jeep mechanic is doing. The build is in the ver...
What are you supposed to do when you get a great deal on a supercharged 6.2 L Hellcat V8? Why not install it into a 2004 Nissan 350Z like this Chrysler/Jeep mechanic is doing. The build is in the ver...
This 1973 Saab Sonett III is for sale in New York, New York for $11,000. The car called “SonaBusa” was built by Darryl Carl at his former company Albany Speed Shop in 2012. The factory Ford Taunus V4...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to create a drift machine using a 1959 Ford Prefect 100E shell over a 2002 Mazda MX-5 chassis with a 1.8 L inl...
This 2004 Mazda RX-8 is for sale in Tarnów, Poland for 36,000 zł or about $9,536. The factory 1.3 L RENESIS two-rotor was replaced with a turbocharged 2.5 L RB25DET inline-six. The engine features a ...
When Viking Performance wanted to transform their 1971 Camaro into the ultimate Pro-touring machine they turned Dick’s Hot Rod Shop in Lakeville, Minnesota. There the company built a custom chassis w...
The Skid Factory is back with an update on their 1965 Chevy Nova SS project. The team’s goal is to replace the factory 283 ci V8 for a built Gen 3 LSx V8 and make it look like a Gen 1 small-block. In...
This BMW E30 316i is being converted into a lightweight race car by a talented German mechanic. They are replacing the factory 1.6 L M40B16 inline-four with a 2.0 L K20A inline-four from Honda Integr...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to create a drift machine using a 1959 Ford Prefect 100E shell over a 2002 Mazda MX-5 chassis with a 1.8 L inl...
Todd Budde has spent the last two years transforming a rusty 1965 VW Single Cab pulled from a river at his company FabFitters in La Vernia, Texas. The countless hours of hard work culminated when Tod...
Don Hass and Steve Serafini of Hass-Serafini Racing are trying to go 300+ mph in the standing mile with a highly modified 2004 Suzuki Hayabusa. The team needs a lot of horsepower to achieve their goa...
Ken Block debuted his Hoonitruck a few months ago built for his Gymkhana TEN video. Back then Ken released few details besides the basics such as a 900+ twin-turbo EcoBoost V6 connected to a Sadev si...
Louis Strianese converted his 2001 Ford Taurus to rear-wheel drive thanks to a lot of work and a full powertrain swap. He’s replaced the factory V6 and drivetrain with a 2.5 L 1JZ-GTE VVTi inline-six...
This Postal Jeep hotrod is for sale in Richmond, Virginia for $15,000. The Jeep cabin sits on a custom chassis made from 2x6x3/16 rectangular tubing with a 1955 Ford I-beam axle, tranverse leaf sprin...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to create a drift machine using a 1959 Ford Prefect 100E shell over a 2002 Mazda MX-5 chassis with a 1.8 L inl...
This custom Opel Corsa is owned and raced by Esad Dosljak. The car started off as a Corsa A and was built by Konopek Motorsport in Croatia. Behind the driver sits a twin-turbo 2.7 L V6 from an Audi S...
Mark Bruski spent a lot of time and effort transforming his 1986 Camaro Z28 into a mean looking coupe ready to race down the quarter-mile. He started by replacing the tired factory 305 ci LB9 V8 with...
Mark Bruski spent a lot of time and effort transforming his 1986 Camaro Z28 into a mean looking coupe ready to race down the quarter-mile. He started by replacing the tired factory 305 ci LB9 V8 with...
You might remember Furches Performance’s FWD Monte Carlo with a turbocharged LS4 V8 we shared last month. Since then Brandon Furches has received a lot of questions about how he mated the LS4 V8 to a...
One Lap Heroes is back with another update on Konstantinos Sidiras’ 1991 Mazda MX-5 project. In the previous video he shared his trip to Nürburgring and with some testing at the track. In this video ...
This 1989 BMW E30 race car is for sale in Poland for 129,900 zł or about $34,178. It was built by Olek Robak from Robak Motorsport to race competitively for the past two years. The engine is a 2.0 L ...
Justin Johnson only planned to chop the roof on this 1976 Volkswagen Bug at his company Lucky Gunner Garage but after six months of hard work it morphed into something completely different. The proje...
This 1970 Plymouth Barracuda was built by Schwartz Performance in Woodstock, Illinois. Its propelled by a built 426 ci (6.9 L) HEMI V8 using a 6.1 L block, forged internals, and custom-ground camshaf...
Jaron Olivecrona competes in a Nissan S14 with a 5.0 L V12 built by Hartley Engines. The V12 makes 700 horsepower at 9,500 rpm with a 13:1 compression ratio and E85 fuel. Although the engine is based...
This 1996 BMW M3 race car is for sale in Simi Valley, California for $50,000. Under the carbon fiber hood sits a naturally aspirated 3.0 L S54 inline-six that makes 323 horsepower thanks to a tune by...
Matt Urch from Urchfab is back with another update on his “Mongrel” project. The goal is to create a drift machine using a 1959 Ford Prefect 100E shell over a 2002 Mazda MX-5 chassis, 1.8 L inline-fo...